Columbia-Spas Aeware Manuel d'utilisateur télécharger pdf (Page 26)

in.xm

SP - OT

Internal hardware temp. is too high

• Remove spa skirt and let system cool down.

• A breaker reset may be required to clear error.

SP - OH & blinking water temp. on the keypad display

water temperature exceeding 112°F is detected

• Remove spa cover and let spa cool down.

• Add cold water and lower ﬁ lter cycle.

• If the temperature cools down within normal limits the error will

reset itself.

• If error persists, measure the temperature with a DIGITAL

thermometer and compare its reading with temp. on the display.

If temp. reading is different, replace in.therm.

• If problem persists replace pack.

SP corrective actions

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 53 54

Pas de commentaire

Columbia-Spas Aeware Manuel d'utilisateur Page 26